Item #: SSF-C18R

Availability:

1.8mm Sterling Silver Seamless round crimp beads, 0.8mm Hole. These are often referred to as "tiger tail crimps". Package Size: 50 Pieces

Item #: SSF-C2020T

Availability:

Sterling Silver seamless tube crimp beads, 2x2mm. Package Size: 50 Pieces.

Item #: SSF-C2030T

Availability:

Sterling Silver seamless tube crimp measures 2x3mm (overall dimensions); inner diameter is about 1.4mm. Package Size: 20 Pieces.

Item #: SSF-C4030T

Availability:

Sterling Silver seamless Crimp Tubes are an extra large size at 3x4mm. Interior measurement of this crimp is approximately 2.5mm. Sold in packages of 10 Crimps.

Item #: SSF-C2020TW

Availability:

Twisted Sterling Silver Crimp Bead. Popular tube-style crimp has a twisted pattern that increases holding power. Crimp by flattening with a needle nosed plier (no specialized crimping pliers required). Picture is enlarged to show twisted pattern detail. Inner diameter is about 0.05 inches (1.2mm), nominally labeled a 2x2mm crimp (actual measurements are about 1.8mm). Pkg of 50 Crimps.

Item #: SSF-CC30M

Availability:

Sterling Silver. Similar to our other 3mm crimp covers, but these covers have been given a matte (sandblasted) surface. Actual closed diameter is exactly 3.0mm (slightly smaller than the shiny covers). Package Size: 10 Pieces.

Item #: SSF-CC30

Availability:

Slick! Hides crimps: closes to look like 3mm Round Bead; use outer position of crimping pliers to close. Actual closed diameter is about 3.1mm (slightly larger than the Matte covers). Sterling Silver. Package Size: 10 Pieces.

Item #: SSF-CE048

Availability:

Simple and fast method of attaching a loop to the end of Beadalon or other stranded products. Crimp end shown in the center of the picture was flattened with a needle nosed plier. Especially nice for pearl jewelry because there is no need to hide the loose end of wire within the tiny holes in pearls. Crimp inner diameter is .019" (.48mm), hole in loop: 1.5mm, overall length: 6mm. Sterling Silver. Package Size: 10 Pieces.

Item #: SSF-CE08

Availability:

Sterling silver crimp ends with a loop - specifically designed to fit the 0.7mm sterling silver beading chain! These are extremely easy to use - just slip the beading chain inside the tube and squeeze the center section of the crimp finding flat. For extra security, you may want to coat the end of the chain with a dab of glue (rated for a metal to metal bond) before crimping. Sold in pairs.

Item #: SSF-CEFLD

Availability:

Fold over style finding is designed for use with cord materials in the 1mm to 2mm range. End loop is closed. Overall length is 11.3mm; opening in the fold over slot is about 2.5mm wide and there is a small tooth (very hard to see in the picture) that helps to keep the cord from pulling out. Picture shows front view (top of picture), cord crimped in finding (viewed from the back), side view (middle of picture), and back view (bottom of picture). Sterling Silver, very sturdy, sold individually.

Item #: SSF-CE19

Availability:

Used for attaching Greek Leather cord to clasps. 8.5mm long, 3.5mm diameter. One crimp end is shown on end to display hole size - about 1.9mm. Sturdy closed loop has an opening of about 2mm. Sample shown with leather has been crimped. These are nicely made crimp ends - heavy enough to hold well, but light enough to crimp closed with crimping or needle nosed plier. Sold individually - but remember that for most projects, you need two - or a matching hook crimp end (Part #SSF-CE19H).

Item #: SSF-BLOPEN

Availability:

Sterling Silver Bail is designed to work with chain or cord (both examples shown in picture). Open design keeps the bail light weight without sacrificing size. Opening in bail is about 3x4.5mm. The loop at the bottom can be opened (at the upper rear part of the loop, best seen in the bail on the upper right - a side view) and measures 5mm on the outside (3mm on the inside). Sometimes called a Rabbit Ears bail. Overall size is about 13x4.5mm. Sold individually.

Item #: SSF-BLGLUE/HM

Availability:

Give a unique and organic look to your designs using this Sterling Silver Bail with a Hammered surface texture. A flatter area at the base is suitable for gluing (it has a bit of a textured target that increases surface area for adhesion). Bails of this kind are designed for gluing to items with flat backs (cabochons) to create a pendant. Overall size of finding is 14x6mm; opening in bail loop is about 1.6mm. Sold individually.

Item #: SSF-BL80

Availability:

Sterling Silver Snap Bail, 8mm tall, 2.5mm inside measurement. The picture shows an example of the bail connected to a 15mm Heart Pendant to demonstrate size; one bail is also shown on it's side. Bails only - these do not come with a pin. Sold in packages of 10 pieces.

Item #: SSF-BL65

Availability:

Sterling Silver Snap Bail, 6.5mm tall, 2mm inside measurement. The picture shows an example of the bail connected to a 15mm Heart Pendant to demonstrate size; one bail is also shown on it's side. Bails only - these do not come with a pin. Sold in packages of 10 pieces.