CUC-T11-02-H

Delicate floral patterned toggle - this is a cast design, which allows both sides of the "ring" and the full surface of the bar to be decorated. This is a rather petite toggle - the outer dimension of the ring is about 11mm but the inner diameter is only about 6mm due to the cast width of the ring. The bar is about 13mm long.

Availablity:

Quantity:

CUF-LLEAF-H

Aren't these great? A large, solid copper leaf works as a link - with a closed loop at the top and a hook at the bottom (at bottom center you can see the hook most clearly). Terrific for earrings (as our sample shows). Overall measurements are about 27x13mm. Sold individually.

Availablity:

Quantity:

CPC-HE21-A

Nice looking hook with a eye that looks similar to a nice chain bail. Picture shows two different views of the eye. Copper plated antique color finish. Hook is about 21mm long, eye measures about 13mm long; overall length when hooked together is about 31mm. 1 Clasp Set (one hook and one eye).

Availablity:

Quantity:

CPF-RS100-A

Copper Plated Antique finish Split Rings, steel base, approximately 10mm outer diameter. Sold individually.

Availablity:

Quantity:

SSF-EWDSGN

Elegant "designer style" French ear wire, 20ga Construction, 2mm ball front. Sterling Silver. Package size: 1 pair

Availablity:

Quantity:

CUF-EWSSDC-H

Beautiful decorative earwire, handmade from solid copper, then decorated with a sterling silver coil and small "bali style" bead. Overall length is about 23mm, sold by the pair.

Availablity:

Quantity:

CUC-HE23-01-H

This handmade necklace hook has a nice looking flower surrounded by two rings that decorate the center section. Notice that the center of the flower may have a "dot" of copper in the center or may not. Finish on the rings occasionally may be rough, as shown. Also shown (center) is the back of the hook which is plain (undecorated). Length of the hook, not including the rings is about 23mm. Comes with two closed rings, solid copper, sold by the set (one necklace hook with 2 rings)

Availablity:

Quantity:

CUC-HE30-01-H

This handmade necklace hook is on the larger side at 30mm long (not including the rings). A double "bali coil" decorates the center section. Comes with two closed rings, solid copper, sold by the set (one necklace hook with 2 rings)

Availablity:

Quantity:

CUC-T11-01-TS

A beautiful combination of copper and sterling silver, this copper heart is framed in silver and also includes a chain of soldered silver links that work as an extender (making it easier to insert the bar into the ring). Handmade in Turkey, 11.5x9.5mm Oval Ring, 26mm Bar, 1 set.

Availablity:

Quantity:

SSF-CN12x10-TC

This great looking cone finding will add some pizazz to your multi-strand jewelry design! A sterling silver cone has a delicate surface design in copper and silver and a copper ring around the small end of the cone. Overall dimension of the cone is 12x10mm and the smaller end has an inside diameter of about 1.8mm. Handmade in Turkey, sold individually.

Availablity:

Quantity:

CUC-L12

Hurrah! After years of looking, we finally have a source for solid copper (geniune copper) Lobster claws. These 12mm clasps are really nicely made. Measurements given are the overall length (including the loop at the base) by the width. The loop at the bottom is a closed loop. Sold in packages of 5 clasps.

Availablity:

Quantity:

CUC-L15

Finally! After years of looking, we finally have a source for solid copper (geniune copper) Lobster claws. These large 15mm clasps are really nicely made. Measurements given are the overall length (including the loop at the base) by the width. The loop at the bottom is a closed loop. Sold in packages of 5 clasps.

Availablity:

(Out of Stock)

CPF-H2306

Itty bitty headpins - just enough wire to insert a 6mm bead (shown) and make a loop. Brass base, durable antique copper finish. Pins are about 0.6 inches (16mm) long. They are a bit thinner than a 22 gauge wire at 0.6mm thick. You'll typically find about 70-75 pins per 0.1 ounces. Sold by weight - 0.1 ounce packages.

Availablity:

Quantity:

CPF-E2306

Itty bitty eyepins - just enough wire to insert a 6mm bead (shown) and make a loop. Brass base, durable antique copper finish. Pins are about 0.6 inches (16mm) long. They are a bit thinner than a 22 gauge wire at 0.6mm thick. You'll typically find about 50-55 pins per 0.1 ounces. Sold by weight - 0.1 ounce packages.

Availablity:

Quantity:

CUF-CE048

Simple and fast method of attaching a loop to the end of Beadalon or other stranded products. Crimp end shown in the center of the picture was flattened with a needle nosed plier. Especially nice for use with beads that have tiny holes because there is no need to hide the loose end of wire after crimping. Crimp inner diameter is .019" (.48mm), hole in loop: 1.5mm, overall length: 6mm. Solid copper constructuion, sold in packages of 10 pieces.

Availablity:

Quantity:

CUF-C3030

Large, heavy duty seamless crimp tubes, 3x3mm, inner diameter of 2.25mm. Solid copper constructuion, sold in packages of 10 pieces.

Availablity:

Quantity: