SSF-C18R

1.8mm Sterling Silver Seamless round crimp beads, 0.8mm Hole. These are often referred to as "tiger tail crimps". Package Size: 50 Pieces

Availablity:

Quantity:

SSF-C2020T

Sterling Silver seamless tube crimp beads, 2x2mm. Package Size: 50 Pieces.

Availablity:

Quantity:

SSF-C2030T

Sterling Silver seamless tube crimp measures 2x3mm (overall dimensions); inner diameter is about 1.4mm. Package Size: 20 Pieces.

Availablity:

Quantity:

SSF-C4030T

Sterling Silver seamless Crimp Tubes are an extra large size at 3x4mm. Interior measurement of this crimp is approximately 2.5mm. Sold in packages of 10 Crimps.

Availablity:

Quantity:

SSF-C2020TW

Twisted Sterling Silver Crimp Bead. Popular tube-style crimp has a twisted pattern that increases holding power. Crimp by flattening with a needle nosed plier (no specialized crimping pliers required). Picture is enlarged to show twisted pattern detail. Inner diameter is about 0.05 inches (1.2mm), nominally labeled a 2x2mm crimp (actual measurements are about 1.8mm). Pkg of 50 Crimps.

Availablity:

Quantity:

SSF-CC30M

Sterling Silver. Similar to our other 3mm crimp covers, but these covers have been given a matte (sandblasted) surface. Actual closed diameter is exactly 3.0mm (slightly smaller than the shiny covers). Package Size: 10 Pieces.

Availablity:

Quantity:

SSF-CC30

Slick! Hides crimps: closes to look like 3mm Round Bead; use outer position of crimping pliers to close. Actual closed diameter is about 3.1mm (slightly larger than the Matte covers). Sterling Silver. Package Size: 10 Pieces.

Availablity:

Quantity:

SSF-CE048

Simple and fast method of attaching a loop to the end of Beadalon or other stranded products. Crimp end shown in the center of the picture was flattened with a needle nosed plier. Especially nice for pearl jewelry because there is no need to hide the loose end of wire within the tiny holes in pearls. Crimp inner diameter is .019" (.48mm), hole in loop: 1.5mm, overall length: 6mm. Sterling Silver. Package Size: 10 Pieces.

Availablity:

Quantity:

SSF-CE08

Sterling silver crimp ends with a loop - specifically designed to fit the 0.7mm sterling silver beading chain! These are extremely easy to use - just slip the beading chain inside the tube and squeeze the center section of the crimp finding flat. For extra security, you may want to coat the end of the chain with a dab of glue (rated for a metal to metal bond) before crimping. Sold in pairs.

Availablity:

Quantity:

SSF-CEFLD

Fold over style finding is designed for use with cord materials in the 1mm to 2mm range. End loop is closed. Overall length is 11.3mm; opening in the fold over slot is about 2.5mm wide and there is a small tooth (very hard to see in the picture) that helps to keep the cord from pulling out. Picture shows front view (top of picture), cord crimped in finding (viewed from the back), side view (middle of picture), and back view (bottom of picture). Sterling Silver, very sturdy, sold individually.

Availablity:

Quantity:

SSF-CE19

Used for attaching Greek Leather cord to clasps. 8.5mm long, 3.5mm diameter. One crimp end is shown on end to display hole size - about 1.9mm. Sturdy closed loop has an opening of about 2mm. Sample shown with leather has been crimped. These are nicely made crimp ends - heavy enough to hold well, but light enough to crimp closed with crimping or needle nosed plier. Sold individually - but remember that for most projects, you need two - or a matching hook crimp end (Part #SSF-CE19H).

Availablity:

Quantity:

SSF-BLOPEN

Sterling Silver Bail is designed to work with chain or cord (both examples shown in picture). Open design keeps the bail light weight without sacrificing size. Opening in bail is about 3x4.5mm. The loop at the bottom can be opened (at the upper rear part of the loop, best seen in the bail on the upper right - a side view) and measures 5mm on the outside (3mm on the inside). Sometimes called a Rabbit Ears bail. Overall size is about 13x4.5mm. Sold individually.

Availablity:

Quantity:

SSF-BLGLUE/S

Sterling Silver Bail with a cupped pad area designed for gluing to items with flat backs (cabochons) to create a pendant. Pad surface is 7x5mm with a cupped area to improve gluing adhesion. Overall size of finding is 12x5mm; opening in bail loop is about 2.9x2.5mm. We also sell Glue Pad Earring Posts (item #SSF-EPPAD5 & SSF-EPPAD5L).

Availablity:

Quantity:

SSF-BLGLUE/M

Sterling Silver Bail has a cupped pad area designed for gluing to items with flat backs (cabochons) to create a pendant. Pad surface is 10x6mm with a cupped area to improve gluing adhesion. Overall size of finding is 16x6mm; opening in bail loop is about 4x3mm. One smaller glue on bail (item #SSF-BLGLUE/S) is shown in the lower right of the picture for size comparison.

Availablity:

Quantity:

SSF-BL80

Sterling Silver Snap Bail, 8mm tall, 2.5mm inside measurement. The picture shows an example of the bail connected to a 15mm Heart Pendant to demonstrate size; one bail is also shown on it's side. Bails only - these do not come with a pin. Sold in packages of 10 pieces.

Availablity:

Quantity:

SSF-BL65

Sterling Silver Snap Bail, 6.5mm tall, 2mm inside measurement. The picture shows an example of the bail connected to a 15mm Heart Pendant to demonstrate size; one bail is also shown on it's side. Bails only - these do not come with a pin. Sold in packages of 10 pieces.

Availablity:

Quantity:

SSF-BLFCY

Fancy Sterling Silver Pinch Bail can be used with pendants that are drilled from front-to-back (sample shown in picture). Side view of bail shows the pins (1mm diameter) that fit into the drilled hole - just pinch to close. Heavy duty construction - gluing is not required, but may be desired for extra security. Overall size is 9x5.5mm, inside width about 3mm. Sold individually.

Availablity:

Quantity:

SSF-BLFCY/RO

This small handmade Sterling Silver bail has a decorative front. It is a fixed style, designed to have cord or chain inserted though the top section. Inner measurement for cord opening is about 3.5mm. The 3mm loop at the bottom is open, as shown. Overall size is about 10x5mm, sold individually.

Availablity:

Quantity:

SSF-BLFX/RO

Sterling Silver bail is a fixed style, designed to have cord or chain inserted though the top section. Inner measurement for cord opening is about 2mm. The 3.5mm loop at the bottom of the bail can be opened, if needed (at the side - almost impossible to see in the picture). Overall length is about 8.5mm, sold individually.

Availablity:

Quantity:

SSF-BLR4/RO

This versatile Sterling Silver finding gives you many possibilities for connecting beading components. This bail looks like a plain 4mm round bead with an attached open ring, allowing you to easily connect charms or other dangling objects to your strung designs. It works wonders for earring construction, as well. The 2mm loop at the bottom of the bail can be opened, if needed (at the side - almost impossible to see in the picture) and the hole size through the bead is 1mm. Sold individually.

Availablity:

Quantity:

SSF-BLR4/H21

This Sterling Silver round ball bail with an attached head pin allows for creative methods of connecting beading components. This bail looks like a short head pin with an attached 4mm round bead. The hole size through the bead is 1mm; the head pin portion is 21ga thick and 3/4 inch long. Sold individually.

Availablity:

Quantity:

SSF-BLPLN

Use with pendants that are drilled from front-to-back (sample shown in picture). Side view of bail shows the pins (1mm diameter) that fit into the drilled hole - just pinch to close. Heavy duty construction - gluing is not required, but may be desired for extra security. Overall size is 11.5x4.5mm, inside width about 5mm. Sterling Silver. 1 Bail.

Availablity:

Quantity:

SSF-BLPNCH

Simple pinch bail is designed for use with items that are drilled from front to back. Stamped construction, sterling silver, may be glued in place. This finding is also called a prong bail. Overall size is about 8x4mm. Sold in packages of 10.

Availablity:

Quantity:

SSF-CN12x4

Sterling Silver, 12x4mm Cone. Use for gathering the ends of multi-strand jewelry or as a bead cap or separator. Nicely made, no visible seam, 1.3mm hole (small end). Sold individually.

Availablity:

Quantity:

SSF-CN17x6

Sterling Silver, 17x6mm Cone. Use for gathering the ends of multi-strand jewelry or as a bead cap or separator. Nicely made, no visible seam, 1.5mm hole opening (small end). Sold individually.

Availablity:

Quantity:

SSF-BTCLH

Sterling Silver, heavy duty clamshell, slightly larger than the loop style tip. Connect to a clasp by folding the hook closed. These are sometimes also called "callottes" or simply, "knot covers". Finding is about 9mm long and clamshell area closes to approximately 4mm in diameter. Package Size: 10 Pieces.

Availablity:

Quantity:

SSF-BTCLL

Sterling Silver clamshell style bead tip with a closed loop for connection, slightly smaller than the hook style tip. These are sometimes also called "callottes" or simply, "knot covers". Finding is about 8mm long and clamshell area closes to approximately 3.5mm in diameter. Package Size: 10 Pieces.

Availablity:

Quantity:

SSF-BTS

Small Sterling Silver bead tip with open half cup, small hole: 0.039 inch hole (or 1mm). Finding is about 5mm long and the half cup is about 3mm in diameter. Package Size: 20 Pieces.

Availablity:

Quantity:

SSF-E2105

Stiff & sturdy 21ga Sterling Silver pin, 0.5" long. May be used with either size bail with a small bail shown for size reference. Pkg of 10 Pins.

Availablity:

Quantity:

SSF-WG

Also called "cable guards" or "cable thimbles", this great new finding extends the life of your jewelry by protecting stringing products at the place where they connect to a clasp. The first picture shows the wire guard around a toggle loop, with a crimp and in place, ready to crimp. The second picture shows the finding close up from three different angles. 4.5x3.5mm overall, hole opening accommodates .019" (.48mm) stringing material. Sterling Silver, Anti-tarnish treated. Package size: 10 pieces.

Availablity:

Quantity:

SSF-TAG

Shown with 10mm Lobster Clasp - use with any clasp that does not come with a ring or tag. Works with all the clasps we carry (up to 13mm, including the Heart clasps). These are nice with Spring rings because the thin tag will fit through the small opening; 9x3.3mm, 0.45mm thick, stamped '925' on one side. These are sometimes called "Chain Tags" or "Quality Tags". Package size: 1 Piece.

Availablity:

Quantity:

SSF-J4521V

The key feature of an oval jump ring is that the opening is on the side (on the longer part of the oval). This means that most of the time the things that are being connected will not pull against the opening. The outer dimension of these Sterling Silver jump rings is 4x5mm. 21 gauge is about 0.7 mm (0.028 inch) thick. Package size: 50 pieces.

Availablity:

Quantity:

SSF-J4020

Outer diameter of Sterling Silver open jump ring is 4mm. 20 gauge is about 0.81 mm (0.032 inch) thick which is fairly sturdy for this size of ring. Package size: 50 pieces.

Availablity:

Quantity:

SSF-J5020

Outer diameter of Sterling Silver jump ring is 5mm. 20 gauge is about 0.81 mm (0.032 inch) thick. Package size: 50 pieces.

Availablity:

Quantity:

SSF-J6019

Outer diameter of Sterling Silver open jump ring is 6mm. 19 gauge is about 0.91 mm (0.04 inch) thick. Package size: 50 pieces.

Availablity:

Quantity:

SSF-R55TW

These beautiful Sterling Silver closed rings have a twisted pattern - they will work with clasps, but are so pretty that you might want to feature them in your design as links or spacers. 5.5mm outer measurement, 3.3 hole, 1.3mm thick. 1 Ring.

Availablity:

Quantity:

SSF-R6020C

6mm Sterling Silver Soldered Ring, 4.4mm inside diameter, material thickness is about 0.8mm (.030 inches - or 20 ga). These rings work perfectly with smaller lobster clasps (shown with a 10mm Lobster claw) and spring rings. Package size: 1 Ring.

Availablity:

Quantity:

SSF-R6517C

6.5mm Sterling Silver Cast Ring, 4.3mm inside diameter, material thickness is about 1.1mm (.045 inches - or 17 ga). Good for use with larger clasps, such as the 11mm Oval Lobster Clasp shown. Package size: 1 Piece.

Availablity:

Quantity:

SSF-RS50

Small Sterling Silver Split rings have many uses in connecting jewelry parts. The picture shows one 10mm Lobster clasp for a size comparison. Some people like to use specialty Split Ring Plier for help holding them open while attaching parts. Sterling Silver. Package size: 1 Piece.

Availablity:

Quantity:

SSF-RS60

Shown with 12mm Lobster Claw - has many uses in connecting jewelry parts. Some people like to use specialty Split Ring Plier for help holding them open while attaching parts. Sterling Silver. Package size: 1 Piece.

Availablity:

Quantity:

SSF-SP2-6

Thin two hole Spacer bar finding measures 6mm between hole centers, overall length is about 9mm. Sterling Silver. Package size: 10 Pieces.

Availablity:

Quantity:

SSF-SP3-6

Thin three hole spacer bar finding measures 6mm between hole centers, overall length is about 15mm. Sterling Silver. Package size: 10 Pieces.

Availablity:

Quantity:

SSF-ENHSL

A "pearl bail" or enhancer is a finding that allows you to temporarily attach a pendant to a knotted strand of pearls. This style of enhancer is hinged and has a small snap closure so you can fasten it around a strand of pearls. The closed loop at the bottom allows you to connect a pendant to the enhancer using a jump ring or split ring. Overall size is about 9.5x6mm. Sterling Silver. Package size: 1 Piece.

Availablity:

Quantity:

SSF-ENHM

This finding allows you to temporarily attach a pendant to a knotted strand of pearls. It is hinged and has a small snap closure. It will not damage your pearls - and it allows interchanging pendants at will. Some people also call this finding a "pearl bail". Overall size is about 11x8mm, Sterling Silver. Package size: 1 Piece.

Availablity:

Quantity:

SSF-ENHM/FCY

A Pearl Enhancer finding allows you to temporarily attach a pendant to a strand of beads, such as a knotted pearl necklace. It is hinged and has a small snap closure. It will not damage your beads - and it allows interchanging pendants at will. Some people also call this finding a "pearl bail". This one has a fancy front design that hides the small attachment loop. Overall size is about 15x9mm, Sterling Silver. Package size: 1 Piece.

Availablity:

Quantity: