Hanger Bails are designed for use with components with a large hole, such as many styles of donut beads. This one has a subtle ridged design along each edge. Overall size is about 26x5mm. Inside measurement within the hanger is about 19mm. Loops at the top of the bail have an opening of about 2.5mm. The back of the finding is narrower than the front (about 2.75mm), but your component must have at least a 5mm hole to allow the top loops to fit through. Made from brass with a sturdy bright Gold colored finish. Sold individually.
The design of this bail allow you to easily exchange donuts or other components.
These donut hangers will fit a range of donut sizes. Shown in the center of the picture is a 40mm Poppy Jasper donut that is similar to our line of regularly stocked donuts. Our donuts tend to be between 5 to 6mm in thickness, so they sit low in the hanger, as shown. The Moss Agate donut on the left is a 50mm donut, but it has a large center hole (12.5mm) so the part that fits in the holder is only about 19mm across. The 40mm Labradorite donut on the right is fairly thick (7.5mm) so it wants to sit in the middle of the hanger, as shown. Sorry - we do not carry Labradorite donuts or 50mm donuts - these were borrowed from a private collection to demonstrate fit, only.
While these hanger bails are designed to opened wide enough to slip the donut over the loops, repeated opening and closings or opening the bail past about 45 degrees can cause the material to crack.
These donut hangers will fit a range of donut sizes. Shown in the center of the picture is a 40mm Poppy Jasper donut that is similar to our line of regularly stocked donuts. Our donuts tend to be between 5 to 6mm in thickness, so they sit low in the hanger, as shown. The Moss Agate donut on the left is a 50mm donut, but it has a large center hole (12.5mm) so the part that fits in the holder is only about 19mm across. The 40mm Labradorite donut on the right is fairly thick (7.5mm) so it wants to sit in the middle of the hanger, as shown. Sorry - we do not carry Labradorite donuts or 50mm donuts - these were borrowed from a private collection to demonstrate fit, only.
