Item #: PWB-P-CATC

Availability:

Clever circular shaped cat design fits perfectly on this disc shaped bead. Cat curls up and looks out one side of bead and the other side shows the cat's back. Bead is about 13.5mm in diameter, 4.5mm thick. Hole runs side to side, as shown. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.

Item #: PWB-P-RABC

Availability:

This disc shaped bead has a curled up bunny design on each side of the bead. Size is about 13.5mm in diameter, 4.5mm thick. Hole runs as shown by the wire in the picture. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.

Item #: PWB-P-CATR

Availability:

Bead shaped like a cat in a resting position - one side of bead looks like the front of the cat and the other shows the cat's back. Bead is about 13mm long and about 10.5mm high. Hole runs up and down, as shown. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.

Item #: PWB-P-RABH

Availability:

Bead shaped like a rabbit in motion - design appears on both sides of the bead. Bead is about 16mm long and about 10.5mm high. Hole runs up and down, as shown. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.

Item #: PWB-P-FISH

Availability:

Fish Bead is 19mm long and about 8mm high. Hole runs nose to tail. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.

Item #: PWB-P-HORS

Availability:

Bead shaped like a horse in the classic carousel position - design is very three dimensional all the way around the bead. Bead is about 25mm nose to tail and about 22mm high. Hole runs up and down, as shown. Cast from Pewter, natural pewter colored surface (not silver plated). Sold individually.