Item #: GBD-SF-MNR-04

Availability:

Rainbow Moonstone has been cut into long, elegant marquise shaped drops and then are fully faceted. The blue "flash" appears in most pieces, but tends to be understated, as shown. The base color is slightly white to almost transparent. These are hand cut and faceted drops, so expect the typical irregularities, including drill holes that are not quite level across the stone and very slightly asymmetrical shapes. Sold individually and priced by the carat, sizes are given for reference; size ranges overlap because some drops are thinner/thicker than others.

Please click on the image to see weight ranges and approximate dimensions for each size category.

Item #: GBD-S-QSM-01

Availability:

Great looking marquise shaped drop beads are made from richly colored Smoky Quartz. Beads are drilled across the top, but the location of the hole can vary a bit, as shown in the picture. Also, the holes are sometimes not quite level, so please allow for this possibility in your design. Overall size is about 18x9mm. Color is a uniform deep smoky color and the clarity is very good; smooth polish throughout. Sold individually.

Item #: GBD-SF-IOL-03

Availability:

These fully faceted beads are cut in a Marquise shape from some of the biggest pieces of Iolite that we we've seen for a long time. The color is also the excellent blue-violet to blue-grey that is so sought after in this gemstone. While much of this stock is fairly clear, the size of the pieces make it easy to see that Iolite often has internal 'lines' in the crystal structure. It is possible that the drilled hole that goes across the tip of the bead may not be exactly level - please account for this possibility in your design. Sold individually and priced by the carat, sizes are given for reference; size ranges overlap because some drops are thinner/thicker than others.

Please click on the image to see weight ranges and approximate dimensions for each size category.

Item #: GBD-SF-APT-02

Availability:

These fully faceted Apatite beads are cut in a Marquise shape. While much of this stock is fairly clear (for Apatite), you will see some internal 'lines' in the crystal structure and occasional tiny black inclusions. It is possible that the drilled hole that goes across the tip of the bead may not be exactly level - please account for this possibility in your design. Due to the small size of these drops, expect that the hole size will also be small (they were strung on 0.3mm material when we received them). Sold individually and priced by the carat, sizes are given for reference; size ranges overlap because some drops are thinner/thicker than others.

Please click on the image to see weight ranges and approximate dimensions for each size category.