Item #: TLH-RWIRE

Availability:

Round the end of rough or pointed wire with this cup bur tool. Just twist the hardwood handle while holding the cup on the end of your wire. The cutting surfaces that smooth the wire are inside a 1.8mm cup. Designed for soft wire such as sterling silver, copper or gold-filled wires. Cup bur manufactured in Switzerland, tool assembled in the United States. 1 tool with storage tube, packaged by Beadsmith.

Item #: TLS-GIZMO

Availability:

It couldn't be simpler! Crank wire around the rod as pictured above and you've made a coil spring. Pull this spring off and insert a core wire. Now coil this spring around the larger rod in your kit to form a cylinder bead. Then, if you like, shape it into a bi-cone or sphere. Imagine the possibilities! You can use the Econo Winder with all gauges of ColourCraft (shown below) or other soft colored or copper wire to make beaded jewelry and other designs.

Tool includes two cranking rods -- .063" (1.6mm) and .135" (3.4mm) diameter, a bracket frame, and instructions. Wire and beads not included (shown for illustration only).

Item #: TLS-JIG

Availability:

The Deluxe Thing-a-ma-Jig is ideal for forming elaborate loops for jewelry components, including necklace links, ornaments, pins, and various other designs. Simply adjust the pegs on the jig base to create patterns of your own or follow the pattern-sheet included with the jig. You can replicate designs consistently time and time again!

The Deluxe Thing-a-ma-Jig has a sturdy 4"x5" aluminum base with aluminum pegs, making it resistant to peg deformities after prolonged use. The kit contains (20) 3mm pegs, (6) 4mm pegs, (2) 10mm pegs and (2) 18mm pegs. All gauges of ColorCraft can be used with the Deluxe Thing-a-ma-Jig. Wire in picture not included.