|
|
Bubbles
by Morgan Newberg
Materials:
Tools:
Instructions:
- Cut the chain into two 3" pieces.
- Use a 26ga headpin to attach one 2mm bead
to the last link of the chain. Attach another 2mm bead to the next
link, repeat. There should be three 2mm beads attached to the chain.
- Using a 22ga headpin, attach a 4mm
Tanzanite Preciosa Crystal bead to the next link.
- Repeat step 2 with the 3mm beads, attach a
Tanzanite Preciosa Crystal.
- Use a 22ga headpin to attach a 4mm bead to
the next link, then a 5mm bead on the next, and a 4mm bead
last.
- Attach a Tanzanite Preciosa Crystal.
- Repeat steps 4-3-2 in that order.
- Attach the next link with nothing on it
directly to the earwire.
- Repeat steps 1-8 on the other side.
*If
you're unsure how to wire-wrap, "Beginning
Wire Wrapping" is a great place to start!
**Please note that all designs used for tutorials are intended to
inspire. We may run out of any/all products used in a given project.
Most of our designs contain products that are easily substituted. We
do not intend for anyone to copy these designs exactly.
|
|
|
|
|
|
