|
|
|
3 Strand Peridot Necklace |
|
3-Strand Peridot & Copper
Materials:
Tools:
Instructions:
- Cut 3 pieces of Beadalon in an ~8"
piece, ~10" piece,
~12" piece.
- Take the shortest
piece, and place on the bead
board
lining the middle up with the center.
- At the 1" mark on
each side, cimp a crimp
bead and cover with a crimp
cover.
- On one side,
slide your gemstone
briollette onto the beadalon.
- On the other
side, string one of the faceted
gemsone
beads and a copper
sparkle finish bead.
- At the 2" mark on
each side, crimp
one more bead, and
cover with a crimp cover.
- String a faceted gemstone bead
and a copper sparkle
finish bead on each side.
- Crimp a Copper Crimp end with Loop
on the ends. If
you don't have
those, double back the Beadon
through a crimp,
leaving a small loop,
and crimp that. Set aside
- Take the 10"
piece of Beadalon
and place it on the beadboard.
- Crimp at the 1.5"
mark on each side and cover.
- String a faceted teardrop on
one side and another faceted
round and sparkle finish bead on the other side.
- Crimp and
cover at the 3" mark on each side.
Slide a faceted round
and sparkle finish bead
on each side.
- Repeat step 8
- Take your 12"
piece of beadalon
and slide the
remaining briollette
onto it.
- Place it on the beadboard and crimp and cover at
the 1" marks.
- Slide a faceted gemstone bead
and a sparkle finish
bead onto each end.
- Crimp and cover
at the 3" marks.
- Slide a faceted gemstone bead
and a sparkle finish
bead onto each end.
- Repeat step 8
- Using 1.5" of copper wire, make a
loop, slide 3 ends
onto the loop and wrap. (See diagram below)
- Take the straight
end and put through the bead
cone,
wrap the end to ~4" of fine
copper cable chain.
- Repeat steps
20-21 on the other side.
- Using the copper jump rings,
attach the extender
to
one side and the clasp
to the other.
*If
you're unsure how to wire-wrap, "Beginning
Wire Wrapping" is a great place to start!
**Please note that all designs used for tutorials are intended to
inspire. We may run out of any/all products used in a given project.
Most of our designs contain products that are easily subsitituted. We
do not intend for anyone to copy these designs exactly.
***This design would look fantastic with any of your favorite Gemstones
and/or Metal
tones.
|
|
|
|
|
|
